Filter By:
Parts & Accessories

$60.00
The durable Hydration Bladder 3 for backpacks contains no BPA or PVC. The easily-detachable hose and valve increase water flow by 20%.
- Can be filled with hot or cold water (up to 60°C)
- Leak-proof and easy to fill with Slide Seal
- Easy to clean all parts
- Volume: 3L
- Weight: 140g
- Measures: 18 x 42 x 1cm

$10.99
CamelBak's Big Bite Valve mouthpiece offers hands-free hydration and is ideal for any application. And, it's remarkably drip resistant.

$64.99
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks.
- Offers 20% more water per sip
- Leak-proof cap is easier to open and close
- On/off lever lets you seal your drinking tube shut with one hand
- Hydroguard technology inhibits the growth of bacteria in the reservoir and tube
- Big bite valve self-seals after each drink, eliminating annoying drips
- Dimensions: 38 x 19 x 6 cm / 15 x 7.5 x 2.5 in

$72.99
- Offers 20% more water per sip
- Leak-proof cap is easier to open and close
- On/off lever lets you seal your drinking tube shut with one hand
- Hydroguard technology inhibits the growth of bacteria in the reservoir and tube
- Big bite valve self-seals after each drink, eliminating annoying drips
- Dimensions: 46 x 23 x 8 cm / 18 x 9 x 3 in

$17.99
The Crux reservoir on/off valve pairs with CamelBak's Big Bite valve and tune. Using an integrated valve, water flow shuts off for added security during transport.

$9.99
New design ensures unrivaled fitness and cycling performance with proven hydration functionality.

$108.99
This reservoir with Thermal Control insulation turns any pack into an all-season 100-ounce hydration system.
Features:
- The Crux Reservoir delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks.
- 10mm closed cell foam reservoir insulation
- Insulated tube and bite valve cover
- Attachment points
- Large adjustable carry loop

$46.60
This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions.
- Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside
- Includes: plastic cage, Allen key, screws and washers
- Fits and encloses up to an average 20oz bottle and has enough room for a heat pack
- Extended zipper pull for easy open close while riding with winter gloves
- Reflective material on logo

$16.00
The EVOC Bite Valve is a mouthpiece for the drinking tube of your Hydration Bladder.
- Self-closing silicone stream valve
- Leak-tight seal against escaping liquid
- Taste-neutral material for pure flavor

$60.00
The drip-proof Hip Pack Hydration Bladder 1.5, with its flexible hose and bite valve, is easy to clean and doesn't contain any toxic substances.
- Free from BPA and PVC
- Leak-proof and easy to fill with Slide Seal
- Plug-n-Play allows quick removal of the hose
- Volume: 1.5L
- Weight: 130g
- Measures: 28 x 18 x 1cm

$60.00
- Leak-proof and easy to fill with SLIDE SEAL
- PLUG-N-PLAY allows quick removal of the hose
- Free from BPA and PVC

$60.00
The durable Hydration Bladder 2 for backpacks contains no BPA or PVC. The easily-detachable hose and valve increase water flow by 20%.
- Can be filled with hot or cold water (up to 60°C)
- Leak-proof and easy to fill with Slide Seal
- Easy to clean all parts
- Volume: 2L
- Weight: 130g
- Measures: 17 x 32 x 1cm

$65.00
The BPA- and PVC-free Hydration Bladder 2 Insulated with insulated hose and a 20% increase in water flow lets you lap it up on even the coldest day in the snow.
- Leak-proof and easy to fill with Slide Seal
- Easy to clean all parts
- Can be filled with hot or cold water (up to 60°C)
- Volume: 2L
- Weight: 140g
- Measures: 17 x 32 x 1cm

$16.00
- Extra-strong magnet keeps the drinking tube in position during your activity.
- Two-piece design for attachment to the hip belt, backpack or vest
- Fits all EVOC hydration systems (excluding insulated drinking tubes)

$27.99
The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved.
- Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment
- Designed to be easily flipped to provide either left or right hand bottle access
- Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset
- Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes

$9.99
- Perfect finishing touch to a bike built
- 7075-T6 aluminum
- M5 x 15mm
- 4Nm max torque
- For water bottle cages only.
- Never use these aluminum bolts in a structural application.

$17.99
Alt-Position Cage Mounts provide an alternative way to raise or lower your water bottle cages when they are assembled on rear hydration devices for you to comfortably mount or dismount your bike. They also provide mounting location options for Topeak Ninja Bottle Cages and allow use of different Ninja bottle cage series combinations on smaller frames and tighter spaces.
- Material: Aluminum
- Compatibility: Topeak TRI-BackUp Elite series, Omni-BackUp Elite, Topeak Ninja bottle cage series
- Size: 10.8 x 1.2 x 9cm / 4.3" x 0.5" x 3.5"
- Weight: 25g / 0.88oz (1 pc w/ 4 bolts)

$32.49
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

$32.49
A solid aluminum seatpost mount providing an extra location for a water bottle cage on e-bikes or smaller frames.
MATERIAL
- Diecast aluminum
DROPPER POST DIAMETER
- Fits ø27.2 - ø31.6 mm (shims incl.)
ADDED FEATURE
- Compatible with water bottle cage, Topeak BackLoader, tail light and saddle bag
SIZE
- 13.6 x 6.2 x 4.6 cm / 5.4" x 2.4" x 1.8"

$13.99
Specialized's Reserve Rack is the aero way to carry water and inflation tools on your bike. The Reserve Rack fastens to your saddle rails and allows you to mount a water bottle cage, mini pump, and two CO2 canister where they'll stay tucked out of the wind.

$3.99
Specialized's Sitero Wing is the best way to carry water and inflation tools without compromising aerodynamics. Designed specifically for the Specialized Sitero saddle (sold separately), this handy accessory can be used with or without a bottle cage and holds a mini road pump and two CO2 canisters.

$15.99
Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.

$12.99
Park Tool's Mini Bottle Opener is made of durable, rustproof stainless steel and has Park's great-to-grip and attractive blue vinyl-coated handle. This handy tool fits on a keychain and has a bottle opener and 10mm open-end wrench built in.

$15.99
Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.

$24.99
Lezyne's Flow Caddy is a lightweight, rigid container that fits into any Lezyne and most other bottle cages, and serves as universal storage for a patch kit, multi-tool, extra tube, or phone. The Flow Caddy features a large opening which provides quick and easy access to contents and a secure screw-top. The labeled organizer secures and organizes your gear.
Page 1 of 3
Next page