Storage

This three-bike stand from Swagman provides an easy way to keep your bikes up and off the floor. The freestanding support holds bikes at the wheel and accommodates all styles of bike. The stand is made of heavy-duty steel tubing and offers a snap-together design that allows you to use the stand for one, two, or three bikes. The stand weighs 8.5 pounds and measures 14 by 46 by 14 inches (WxLxH) fully assembled. - Three bike stand - Accomodates all styles of bike - Easy to load - Expandible in multiples of three - Snap-together design

Looking for the ultimate bike storage solution? Safely and securely store your bike without any heavy lifting with our Steadyrack Classic Bike Rack. Designed to pivot up to 160 degrees and fold away for maximum storage space efficiency, our Classic Racks can be mounted on virtually any wall. Not suitable for bikes with permanent or fixed front fenders. Specialized, Aero, Time Trial & Other Racing, or Road Bikes A minimum clearance of 20mm / 3/4 inches between your bike's front tire and down tube is required to load your bike into the Classic Rack. Some Specialized bikes, aero bikes, road bikes, other racing bikes and all-time trial bikes with less clearance will require our Fender Rack. Please check your bike's suitability. Technical Specifications: - Dimensions: 12cm x 12cm x 72cm - Weight: 3.1kg - Material: Zinc plated steel and plastic - Maximum Tire Width: Up to 2.1" - Recommended Wheel Diameter (inc tire): 20" - 29" - Bike Style: eBikes, Road, Hybrid, Small MTB, BMX - Bikes With Fenders: No - Bikes Without Fenders: Yes - Maximum Recommended Weight: 35kg Installation: We recommend that you measure each of your bikes and mount the racks accordingly, using our installation instructions below or by watching our installation video. This will ensure they're easy to use for all bike owners. Disclaimer: We do not recommend installing our bike racks into dry wall/gyprock. If this is done, our warranty will be void. Please read our installation guide above carefully to ensure you understand where Steadyracks should be installed, and tips on how to safely install on drywall/gyprock whilst upholding warranty.

The Steadyrack Fender Bike Rack is one of the only bike racks designed specifically to accommodate bikes with fenders and mudguards. The Steadyrack Fender Rack can be mounted to virtually any wall and its patented design allows it to swivel almost 160 degrees to either side. It minimizes space without compromising safety and there is no heavy lifting required. This is a truly revolutionary way to store a lot of bikes without taking up much space. Ideal for tires up to 2. 4", bikes with fenders & with a maximum weight of 55 lbs. Some bikes with fenders may not be suitable for this rack. The Steadyrack Fender rack works by sliding between the fender/mudguard and tire when rolling the bike onto the rack. If the stays (steel arms connecting the fender to the bike frame) are very close to the tire or rigid with no flexibility there may not be room to fit the rack arms between and you will not be able to mount the bike in the rack. We recommend a minimum 2cm / 3/4 inch clearance between the tire and stays to enable the rack to flex and fit between. Technical Specifications: - Dimensions: 12cm x 12cm x 72cm - Weight: 3.1kg - Material: Zinc plated steel and plastic - Maximum Tire Width: Up to 2.4" - Recommended Wheel Diameter (inc tire): 20" - 29" - Bike Style: eBikes - WITH Fenders, Road, Time Trial, Hybrid, Small MTB, Commuter, City, Town - Bikes With Fenders: Yes - Maximum Recommended Weight: 25kg Installation: We recommend that you measure each of your bikes and mount the racks accordingly, using our installation instructions below or by watching our installation video. This will ensure they're easy to use for all bike owners. Disclaimer: We do not recommend installing our bike racks into dry wall/gyprock. If this is done, our warranty will be void. Please read our installation guide above carefully to ensure you understand where Steadyracks should be installed, and tips on how to safely install on drywall/gyprock whilst upholding warranty.

Our Mountain Bike (MTB) Rack is designed with larger and stronger folding arms to handle both regular MTB tire sizes as well as plus-size tires. In fact, our MTB bike rack is also suitable for any bike with larger tire sizes and including eBikes and heavy bikes up to 35kg. If you have different brands and models of bike there’s no need to worry about the frame geometry or size. As long as they have round front wheels they will fit in our racks! Like all of our Steadyrack bike wall mounts, you can swivel or pivot your bike side to side up to 160 degrees to get your bike as close to the wall as possible. The vertical mountain bike rack will also fold away when not in use for maximum storage and space efficiency. Our MTB Bike Racks can be mounted on any structurally sound wall or vertical surface, giving you peace of mind whether you’re hanging your MTB in a hallway, in a garage or on a balcony. Not suitable for bikes with permanent or fixed front fenders. Some clip-on front Fenders are OK. These are common with MTB and Fat Bikes, but you can also get them for road bikes, commuter bikes, and hybrids. Check if your bike is suitable for this rack by viewing the measurement instructions. Technical Specifications: - Dimensions: 12cm x 12cm x 80.8cm - Weight: 3.7kg - Material Zinc plated steel and plastic - Maximum Tire Width: 2.1" - 2.8" - Recommended Wheel Diameter (inc tire): 20" - 29" - Bike Style eBikes, MTB, eMTB, Gravel - Bikes With Fenders: No Installation: We recommend that you measure each of your bikes and mount the racks accordingly, using our installation instructions below or by watching our installation video. This will ensure they're easy to use for all bike owners. Disclaimer: We do not recommend installing our bike racks into dry wall/gyprock. If this is done, our warranty will be void. Please read our installation guide above carefully to ensure you understand where Steadyracks should be installed, and tips on how to safely install on drywall/gyprock whilst upholding warranty.

Super huge Storage Hooks are big enough to accommodate fat bike wheels/tires. • Plated and vinyl dipped for long, scratch free service • 470XX Machine thread including two nuts: • Inside to inside 125mm (4-7/8") • Height inside J-bend 150mm (6")

Super huge Storage Hooks are big enough to accommodate fat bike wheels/tires. • Plated and vinyl dipped for long, scratch free service. • 471 Wood thread including two nuts • Inside to inside 125mm (4-7/8") • Height inside J-bend 150mm (6")

Now Available! If you have a home, shop, office, or garage with too many bikes and you need to organize them, start with a RAKK 2.0 bike stand. The freestanding RAKK 2.0 bicycle stand holds your bike upright by the front or rear tire, so it's perfect for storing, displaying or even doing light maintenance work on your bike. The RAKK 2.0 bike stand is made for mountain bikes, gravel bikes, road bikes, kids bikes and more. With a wide body, deep wheel cradle, large tire contact pulleys, and a long support arm, it is compatible with a wide array of bike styles, frame sizes and wheel/tire sizes. RAKK 2.0 contacts only the bike tire, protecting the bike frame and components, yet it securely supports bikes up to 75lbs. Easily park bikes by the front or rear wheel with confidence and stability. Features: - Ideal bicycle storage space for apartments, garages, basements, sheds or even a retail bike shop. - Securely park bikes up to 75lbs. - Versatile design allows for bike parking with front or rear wheel, contacting only the tire without risk of scratching rims or spokes - Accommodates tires sizes (width): 23mm-4.5", tire diameter 20"-29" (20"x1.5" tires or wider). - 3-Position pulley accommodates multiple wheel sizes and bikes with fenders. - Pulley arm folds flat to a compact unit for travel or storage when not in use. - Spring-loaded design is hands-free – simply roll the bike into the wheel cradle and the swing arm holds the bike securely. - Rubber feet with large contact patch maximizes floor grip. - Durable powder coated steel maintains a long-term clean finish. - Plastic free, 100% recyclable packaging. - Assembly required (tool included). - 3-Year Warranty - Available Accessories: E-Tray to securely hold E-bike charger and cables; Wheel Adapter for bikes with 16" wheels. Made to support bikes with properly inflated tires.

Now Available! Keep charging cables organized while your ebike is safely parked thanks to the RAKK 2.0 E bike stand. Based on the wide body, deep wheel cradle, large tire contact pulleys, and long support arm of the RAKK 2.0, the RAKK 2.0 E features a secure tray for the e-bike charger plus cable magnets to organize the plugs. RAKK 2.0 E bike stand easily fits oversized e-bike wheels and tires, supporting bikes up to 75lbs with stability and ease of use. The RAKK design supports bicycles by contacting only the tire and is compatible with a wide array of bike styles, frame sizes and wheel/tire sizes. Park your bikes anywhere in the room by the front or rear wheel with confidence and stability. E-Bike battery charger not included - shown in photos for reference only. Features: - E-bike specific bike storage stand accommodates tire sizes (width): 23mm-4.5", tire diameter 20"-29" (20"x1.5” tires or wider). - Adjustable charger tray keeps valuable ebike charger and cables clean, safe and organized. - Magnetic cord organizers keep the charger cord off the ground and out of harm's way. - Securely park bikes up to 75lbs. - Versatile design allows for bike parking with front or rear wheel without risk of scratching rims or spokes - Accommodates tires sizes (width): 23mm-4.5", tire diameter 20"-29" (20"x1.5” tires or wider). - 3-Position pulley accommodates multiple wheel sizes and bikes with fenders. - Pulley arm folds flat to a compact unit for travel or storage when not in use. - Spring-loaded design is hands-free – simply roll the bike into the wheel slot and the swing arm holds securely. - Rubber feet with large contact patch maximizes floor grip. - Durable powder-coated steel maintains a long-term clean finish. - Plastic-free, 100% recyclable packaging. - Assembly required (tool included). - 3-Year Warranty - Available Accessories: Wheel Adapter for bikes with 16" wheels.

Because you love your bicycles, when you’re not riding them you want to protect them and you need a simple, effective, wall-mount bike parking solution. The Velo Wall Rack 2D is a high quality, versatile bike storage idea for one bike. The arms adjust horizontally and vertically, and have soft rubber protecting your bike’s finish, making the Velo Wall Rack a brilliant bike storage solution for expensive road, cyclocross, mountain and electric bikes. - Ideal bicycle storage solution for apartments, homes, garages and sheds - Soft rubber contact points protect frame finishes - Storage system fits most any road bike, cyclocross bike, mountain bike, or electric bike - Frame cradles safely accommodate most any frame tube shape - Design independently adjusts arms horizontally and vertically to position your bike perfectly - Durable anodized aluminum maintains a long-term clean finish - Cradles adjust horizontally 8?-12? (20.3-30.5cm) from wall - Cradles adjust vertically 7? (17.8cm) - Awesome bike parking solution for even the heaviest of bikes – 50lbs (22.7kg) max load - Mounts to a standard wall stud - Mounting hardware included - Available in black or silver - Patent #D780,640

The Leonardo FT (fat tire) storage hook is to designed to hold "fat tire" bicycles with tires up to 5 inches in width. Featuring elegant space-saving design, this rack offers convenient minimalist storage for any bike at a great price. Instead of throwing your cycling partner in the garage, display your bicycle like the work of art it is. Product Details: - Works with fat tires up to 5" wide - Tire tray saves wall from tire marks - Tough silver powdercoat finish - Rubberized coating protects wheel rim - Maximum load 50lbs (22Kgs)

- 6-Bike Rack - Double-Sided Rack - Parks 3 bikes on each side

Suitable for standard road bike tire widths of 23—32mm, Roadie is small, stylish, and perfect for the urban cyclist. The Roadie is small enough that it virtually disappears into the decor yet magically displays the ride you're so proud of. It is a lifestyle product that brings personality and design in an affordable package.

- Built-in back-plate protects walls from tire marks - Vinyl-coated hook to prevent scratches - Fits all tire sizes - Includes mounting hardware

Bike Bag Storage Bag

The Willworx ‘CONNECTORS’ allows the individual Superstands to be connected in an unlimited number of configurations to suit every bicycle shop layout, size, and display area. They can be staggered to the right or left, side by side, back to back, etc. Some of the configurations are shown here. The CONNECTORS also allow the Superstands to be adjusted closer or further apart, as required for some bicycles with wider handlebars, or to position the bicycles closer where minimum floor space is available. Parking the bicycle with the rear wheel and staggered allows more bicycles to be on display.

- Shop quality bicycle display and storage stand - Graphite ripple powdercoat over steel construction - Four-Point, Foam rubber end-Cap feet - 2 Piece design disassembles for space-Efficient storage - Standard and extreme models feature welded base construction (Extreme model accepts up to 3 inch tires) - Retail model features flat-Packed, Bolt-Together base construction - Fat rack features flat-Packed, Bolt-Together base construction and will suit tires from 3.8" To 5" with three width positions, 4.25", 4.75" And 5.25"

The ever popular Superstand is also available in a multi-bike version. - 2 bike module is 80cm wide (with 40cm spacing between bikes) - The base comes fully welded as an assembly; simply push on the top hoops to the base uprights - Fits BMX 20" wheel size up to and including: comfort bikes, road bikes, MTB tires up to 60mm wide, and hybrid bikes with 700C wheels - Heavy duty, powder coated steel tubing constuction - Rubber feet caps at each end of the main tubing rails - Widely used in bicycle shops, providing clean, neat, non-intrusive bicycle displays - Use back to back as an island display, or end to end along walls - Can be positioned in various layouts and configurations to suit any shop display area

This super cool, super steady patented bikestand will hold any bike with a tire width up to 3.25". - Rubber feet keep it steady and scuff resistant - Looks great in any apartment garage or shop floor - Flatpack version is packaged in a retail box. It simply screws together and is ideal for retail sales For the shop display/welded version, see part # 196-108

This item clamps to the vertical tubing of the stand and is ideal for bicycle mechanics, both professional and amateur. This allows the bicycle brakes & gears to be adjusted whilst the rear wheel is off the ground. Ideal for BMX, racing and competition use. Simply, lift the rear of the bicycle into the frame to suspend the rear wheel.

Topeak's Handlebar Stabilizer is a useful addition to your Dual-Touch storage rack as it securely holds your front wheel and bar, making it easier than ever to work on your bike.

Elegant and functional, Topeak's OneUp is the perfect bicycle storage solution when space is an issue. It has a grooved, durable plastic tray and a molded rubber bar to keep your front wheel securely in place and it also boasts two storage hooks for your riding essentials and a rear wheel pad to keep your walls scuff free.

Topeak's TwoUp TuneUp Bike Stand easily holds 2 bikes up and out of the way. But, the best part is that it's solid enough to serve as a light-duty work stand as well! Made with tough aluminum tubing, the center pillar extends to almost 7 feet while the tripod base acts as a super-stable platform. The 2 included bike mounts swivel up to 30 degrees to accommodate sloping tubes and the lower mount includes a handlebar stabilizer to hold your bike while you're wrenching. Plus, this awesome stand has the capacity to carry up to 4 bikes and 158.7 pounds.

Topeak's Third Hook is the perfect addition to your TwoUp TuneUp storage rack. Get two of these babies and your stand can now hold 4 bikes, enough for the whole family!

The Thule RoundTrip Pro Storage Sleeve is a soft storage sleeve to keep the contents of your RoundTrip Pro bike case tidy when not in use.

• Wall-mount bike rack • Powder-coated finish • Vinyl-coated arms • Holds one bike by the top tube • Folding

Park Tool's Event Stand Add On Kit extends the length of the ES-1 Event Stand (sold separately) by eight feet. It includes one height-adjustable tripod upright, two 47” (119cm) support tubes, and one connector sleeve.

Park Tool Storage Hooks are pefect for hanging bikes, wheels, etc. • Vinyl coated to prevent scratching. • Machine threaded - includes 2 nuts • Made from 7mm steel rod • Thread is a M8 x 1.25 44mm length

- Oversize hooks for large MTB tires and tall aero rims - Inside width of 75mm (2.95") and 150mm (5.9") tall inside the J-bend - 50mm (2") of machine threading with a thread size of 10mm x 1.5mm - Black vinyl coated - Includes two nuts

• Oversized hook for large MTB tires and tall aero rims • Inside width of 75mm (2.95") and 150mm (5.9") tall inside the J-bend • Made from 9.5mm wire • Wood screw thread is nominally 11.4mm outside diameter (15/32") with 7 threads per inch • Use a minimum of 11/32" drill size to pilot wood hole • Blue vinyl coated

• Park Tool Storage Hooks are perfect for hanging bikes, wheels, etc. • Vinyl coated to prevent scratching. • Wood threaded • Made from 7mm steel rod • For a pilot hole in wood, use a 1/4" or 6mm bit • Sold in pairs