Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Stems

$124.99
Gooseneck is Dank Kruk's signature stem from WTP. Unique sculpted look with bar alignment guides. - Shark Tooth Clamping (STC) linear knurling to prevent bar slip - Unique offset rear for improved clamping, material saving and unique look - Recessed top cap section for flush fit - Larger head bolts for more clamping power
$114.99
The Index frontload stem offers a taller 16mm rise, which allows you to run your bars as high as some topload stems, without having to compromise on the clean and simple frontload look. The wider 48mm faceplate helps provides secure and safe clamping, and the sunken section on the top allows you to run your topcap flush with the stem. This is one smooth stem that might just surprise you... - Material: 6061-T6 alloy, full CNC machined - Steertube: 1 1/8“ threadless clamp-on - Weight: 330g (11.65oz)
$107.49
The Logic stem is clean and simple featuring "Shark Tooth Clamping" knurling to ensure your bars never slip. - Stem Type: Front Load - Bar Clamp Diameter (mm): 22.2
$107.49
The Logic stem is clean and simple featuring "Shark Tooth Clamping" knurling to ensure your bars never slip. - Stem Type: Top Load - Steerer Clamp Diameter: 1-1/8-inch - Bar Clamp Diameter (mm): 22.2
$118.00
The Atmos 7k stem is a lightweight performance stem designed for trail and cross-country use and is the lightest stem in the Atmos range. Featuring a rise or drop of 6° depending on your preference, all fasteners are adjustable via a T25 tool for easy, quick adjustments. The Atmos 7k also features an integrated GoPro mount. - ±6° angle - Integrated GoPro mount - T25 fasteners for 1 tool across the cockpit SPECIFICATIONS - Stem Angle/Rise: 6 degrees - Clamp diameter: 31.8mm - Steerer clamp diameter: 1-1/8 in - Hardware: Steel
$101.00
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars—not that you’re worried about that kind of thing. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Colors: Black - Material: Al-7075 - Lengths: 40mm, 50mm, 60mm - Bolts: Steel - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
$149.99 - $176.99
The Elite X4 Mountain Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X4 combines exceptional strength with light weight for durable, solid steering control to tame the toughest trails. It has a four-bolt clamp design and reversible graphics, so your X4 looks great whichever way you run it.
$70.00
Specialized's Comp Multi Stem is forged and machined from 6061 aluminum for stiff, responsive handling. The 6-degree rise puts your bars in a position for improved control and the 31.8mm handlebar clamp is compatible with composite and aluminum handlebars.
$80.00
3D-forged and CNC-machined from 6061 aluminum the Future Stem Comp is optimized for use with all Future Shocks. It's also compatible with our Specialized accessory mount for seamless integration. - 3D-forged and CNC-machined, 6061 aluminum, Future Shock-optimized stem. - Available in 6-degree angles and 60, 70, 80, 90, 100, 110, and 120mm lengths. - Compatible with the Specialized accessory mount.
$150.00
The Alpinist Stem is a light and stiff alloy stem. Designed to perform during big attacks in the hills and furious bunch sprints, while weighing just 110g for featherweight performance when the road goes up. With classic lines, traditional clamp, and huge range of lengths and rise angles, this stem earns the Alpinist name as the ideal upgrade to almost any bike. LIGHT: Every Alpinist product puts a premium on lightweight, because we know lightweight is a key ingredient to creating magical ride quality. Using premium 7075 Alloy and Ti hardware, the Alpinist stem weighs a feathery 110grams in a 110mm length. STIFF: 3D Forged and CNC machined, despite its feathery weight the Alpinist stem delivers the stiffness needed for big power and precise, sharp handling in the most challenging situations. FIT: With seven lengths to choose from, and three different angles of rise, you know you'll find your perfect fit with the Alpinist Stem. Its classic lines, polished black finish, and traditional 31.8mm clamp make it an aesthetic fit with almost any bike. - Material: 3D-forged and CNC-machined, 7075 aluminum - Bolts: Titanium - Lengths: 70, 80, 90, 100, 110, 120, 130mm - Rise: 6, 12, or 17-degree rise - Weight: 110-115g (for 110mm) - Clamp Diameter: 31.8mm - Clamp Height: 40mm - Steerer Tube: 1-1/8"
$150.00
The Control Stem is tailor-made with a 35mm clamp to partner with the Control SL bar, delivering more stiffness and more control—coming in at an incredibly light 100g (50mm). Turns out, you can have it all. LIGHT: Where light weight and stiffness meet. Its high-quality 7075 Alloy and Ti hardware and featherweight function make the Control SL Stem a perfect match for race-day setups. STIFF: Made with the same integrity as the suite of stiff Roval components, the Control SL provides race-ready rigidity allowing for precision on the bike. FIT: With six lengths to choose from and 6 degrees of rise, you know you'll find your perfect fit. - Material: 3D-forged and CNC-machined, 7075 aluminum - Bolts: Titanium - Length: 50mm, 60mm, 70mm, 80mm, 90mm, 100mm - Rise: 6 degree rise - Weight: 100g (at 50mm), 130g (at 100mm) - Clamp Diameter: 35mm - Clamp Height: 40mm - Steerer Tube: 1-1/8"
$150.00
The S-Works Venge stem has been designed to work as a system with the Venge cockpit to optimize aerodynamics, stiffness, and weight. - Seamless integration with the 2019 Venge frame and hidden cables - Optimized for use with the S-Works Aerofly II handlebars for integration - Its dropped clamp and flat upper profile cheat the wind for the maximum aero advantage - Extremely stiff for responsive handling and out of the saddle sprinting
$70.00
The new Trail stem is forged and CNC-machined to meet the demands of today's trail riding with a sublime stiffness-to-weight ratio. - 3D-forged and CNC-machined 6061 alloy construction - 4-bolt oversized 31.8mm handlebar interface with relieved faceplate - Compatible with carbon composite handlebars
$99.99
Dial your fit with this Direct Mount alloy stem with adjustable reach and height to achieve the ideal stance and balance point - Chamfered bar-clamp zones to reduce stress risers and improve fatigue life of handlebars - CNC weight optimized for 31.8 bars - 2D forged, shot peened and anodized for high strength and low weight - A Snap Fit top cap and laser logos for a refined finish - Recommended for: ASTM 5, All mountain, DH, free ride - LENGTH (mm): 25-30 (adjustable) - RISE: 28-33 (adjustable) - DIAMETER (mm): 31.8 - STACK HEIGHT (mm): n/a - WEIGHT ± (g): 130 - TECHNOLOGIES: Adjustable length/rise, chamfered bar clamp - MATERIAL: 2D forged MGR alloy, CNC weight optimized
$68.99
- Micro Grain Refined (MGR) alloy - 5mm headset spacer included - 2D forged MGR alloy - CNC weight optimized - Shotpeen anodized - Key technologies: MGR, chamfered bar clamp - Material: 2D Forged MGR Alloy,CNC Weight Optimized - Length (mm) : 35 / 50 - Rise : 0 Degree - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): 150 (35mm) / 180 (50mm) - Finish: Shot peen anodized, laser logos
$119.99
- Highly weight optimized single crown stem for use with 35mm handlebars - Dial your fit with micro increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Recommended for: ASTM 5, All mountain, enduro, trail, free ride, E-Bike Specs: - Key Technologies: MGR Alloy, chamfered bar clamp, top-cap included - Material: 6-Series Alloy, 3D forged CNC optimized body - Rise (°): 0 - Diameter: 35mm - Stack height: 34mm - Weight: ±131g (35mm) / ±136g (40mm) ±139g (45mm) ±141g (50mm) - Finish: Shotpeen anodized
$119.99
- Highly weight-optimized single crown stem, ideal for Enduro applications with 31.8mm handlebars - Human Factor Design features micro increment size options, tuned to fit any rider size and style - Human Factor cockpit setup index facilitates tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Forged 2-piece faceplate design reduces overall weight without compromising bar clamp security or stiffness - Shot peen-anodized surface increases strength, durability, and fatigue life Features: - Key Technologies: Human Factor Design, MGR Alloy, Chamfered bar clamp, Custom Top-Cap included - Material: 6-Series Alloy, 3D forged CNC optimized body, 2D forged faceplate - Rise (°): 0 - Diameter: 31.8mm - Stack Height: 34mm - Weight: ±133g (33mm) / ±138g (38mm) ±140g (43mm) ±143g (48mm) - Finish: Shotpeen anodized
$57.99
- Unique style, modern geometry, and rock solid construction, without the heavy price tag - Suitable for all disciplines: Freeride, All Mountain, Enduro - Chamfered bar-clamps to reduce stress risers and increase fatigue life in handlebars - Ideal for shorter riders to improve the setup of their cockpit. - Length (mm): 40 - Rise: 0° - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): ±170 - Finish: Shot peen anodized, laser logos
$69.99 - $79.99
- Strong yet competitively lightweight alloy single crown stem for all disciplines - Unique style, modern geometry, and rock-solid construction, without the heavy price tag - Dial your fit with micro-increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars
$69.99 - $79.99
- Strong yet competitively lightweight alloy single crown stem for all disciplines - Unique style, modern geometry, and rock-solid construction, without the heavy price tag - Dial your fit with micro-increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Recommended for: ASTM 5, All mountain, enduro, trail, free ride, DJ, E-Bike
$84.99
Salt Plus Manta stem. - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8" ins - Stem Type: Top Load
$64.99 - $69.99
High rise design with STC (Shark Tooth Clamping) inside the stem to help grip the bars. Central bore for reduced weight, unique side pocket detail. - 6061-T6 alloy - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8-inch - Weight (oz): 10.61 - Stem Type: Front Load
$224.99
- Fully CNC machined - Featuring an oversize center bore - Extensive machining and external webbing to maximize structural strength and stiffness and minimize weight
$224.99
- CNC machined 2014 aluminum body and 7075 aluminum clamps - 240 degree wrap-around, twin plate clamping system - External webbing to maximize structural strength - 118-158g including stainless steel bolts
$224.99
- CNC machined 6082 aluminum body - 7075 aluminum clamps - Unique 240-deg C-shape clamps - Minimal 6-bolt design - U-shape cradle clamp eliminates handlebar stress raisers found with traditional stems - Ultra-wide 64mm clamp width
$150.00
After a delay, the king is back. We've updated the NSB Overlord stem to accommodate 35mm diameter handlebars. A wider clamp area and refined shape improve strength while retaining what we feel are the correct proportions. Still, light enough to pedal all day and strong enough to tackle full days in the Whistler Bike Park. The 35mm diameter stem is available in 35mm and 40mm lengths and will be available in all colors for the smaller Overlord. Specifications: - Clamp Size: 35mm handlebar - Fork Steerer Tube: 1 1/8? - Rise: 0-degree - Stack Height: 38mm - Hardware: 8.8 Grade Gold Zinc plated M6 bolts - Precision CNC Machined in Whistler, B.C. Weight: 35mm – 190g 40mm – 196g
$135.00
Strong enough to endure a season in the Whistler Bike Park and light enough to pedal all day. The Overlord rules everywhere your bike can take you. We’ve updated the selection to suit modern bikes better and now offer a short 32mm length to accompany our 40mm and 50mm lengths. Specifications: - Clamp Size: 31.8mm handlebar - Fork Steerer Tube: 1 1/8? - Rise: 0-degree - Stack Height: 38mm - Hardware: 8.8 Grade Gold Zinc plated M6 bolts - Precision CNC Machined in Whistler, BC Weight: 32mm – 148g 40mm – 170g 50mm – 186g 60mm – 190g 70mm – 205g
$54.99
Top-load design stem with a 6061 aluminum cast body and cold-forged cap for added strength. Recessed sides and front make the Control Stem simple, sleek, and lightweight. The traditional 50mm reach and generous 32mm rise make for a comfortable ride. Product Specifications - Material: 6061 Aluminum - Reach: 50mm - Rise: 32mm - Stack Height: 30mm - Bolts: M8 x P1.25 6mm - Weight: 10.4oz
$349.99
Aero Design Stem - Handlebar Diameter: 31.8mm - Steerer Tube: 28.6mm - Stem Material: Carbon
$349.99
LOOK Design Stem - Handlebar Diameter: 31.8mm - Steerer Tube: 28.6mm - Stem Material: Carbon