Stems

Dial your fit with this Direct Mount alloy stem with adjustable reach and height to achieve the ideal stance and balance point - Chamfered bar-clamp zones to reduce stress risers and improve fatigue life of handlebars - CNC weight optimized for 31.8 bars - 2D forged, shot peened and anodized for high strength and low weight - A Snap Fit top cap and laser logos for a refined finish - Recommended for: ASTM 5, All mountain, DH, free ride - LENGTH (mm): 25-30 (adjustable) - RISE: 28-33 (adjustable) - DIAMETER (mm): 31.8 - STACK HEIGHT (mm): n/a - WEIGHT ± (g): 130 - TECHNOLOGIES: Adjustable length/rise, chamfered bar clamp - MATERIAL: 2D forged MGR alloy, CNC weight optimized

- Highly weight optimized single crown stem for use with 35mm handlebars - Dial your fit with micro increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Recommended for: ASTM 5, All mountain, enduro, trail, free ride, E-Bike Specs: - Key Technologies: MGR Alloy, chamfered bar clamp, top-cap included - Material: 6-Series Alloy, 3D forged CNC optimized body - Rise (°): 0 - Diameter: 35mm - Stack height: 34mm - Weight: ±131g (35mm) / ±136g (40mm) ±139g (45mm) ±141g (50mm) - Finish: Shotpeen anodized

- Highly weight-optimized single crown stem, ideal for Enduro applications with 31.8mm handlebars - Human Factor Design features micro increment size options, tuned to fit any rider size and style - Human Factor cockpit setup index facilitates tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Forged 2-piece faceplate design reduces overall weight without compromising bar clamp security or stiffness - Shot peen-anodized surface increases strength, durability, and fatigue life Features: - Key Technologies: Human Factor Design, MGR Alloy, Chamfered bar clamp, Custom Top-Cap included - Material: 6-Series Alloy, 3D forged CNC optimized body, 2D forged faceplate - Rise (°): 0 - Diameter: 31.8mm - Stack Height: 34mm - Weight: ±133g (33mm) / ±138g (38mm) ±140g (43mm) ±143g (48mm) - Finish: Shotpeen anodized

Salt Plus Manta stem. - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8" ins - Stem Type: Top Load

High rise design with STC (Shark Tooth Clamping) inside the stem to help grip the bars. Central bore for reduced weight, unique side pocket detail. - 6061-T6 alloy - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8-inch - Weight (oz): 10.61 - Stem Type: Front Load

STC (Shark Tooth Clamping) inside the stem to help grip the bars, 48mm wide faceplate with central bore for reduced weight, unique side pocket detail. - 6061-T6 alloy - STC (Shark Tooth Clamping) inside the stem to help grip the bars - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8-inch - Weight (oz): 10.8 - Stem Type: Top Load

Mid rise, top loading stem design, STC (Shark Tooth Clamping) inside the stem to help grip the bars, 48mm wide faceplate with central bore for reduced weight, unique side pocket detail. - 6061-T6 alloy - STC (Shark Tooth Clamping) inside the stem to help grip the bars

Salt Pro Front loading stem with STC (Shark Tooth Clamping) inside the stem to help grip the bars, 48mm wide faceplate with central bore for reduced weight and unique side pocket detail. - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8-inch - Stem Type: Front Load

Proven time after time to be a reliable, easily adjustable system that continues to outperform the competition, the 4-Axis stem is a surefire go-to for an entry level stem that has world-class performance. - Bar Clamp Diameter: 31.8mm - Material: Alloy - Stem Angle: 30 degrees - S.H.I.S. Stem Clamp Diameter: 28.6

- Fully CNC machined - Featuring an oversize center bore - Extensive machining and external webbing to maximize structural strength and stiffness and minimize weight

- CNC machined 2014 aluminum body and 7075 aluminum clamps - 240 degree wrap-around, twin plate clamping system - External webbing to maximize structural strength - 118-158g including stainless steel bolts

- CNC machined 6082 aluminum body - 7075 aluminum clamps - Unique 240-deg C-shape clamps - Minimal 6-bolt design - U-shape cradle clamp eliminates handlebar stress raisers found with traditional stems - Ultra-wide 64mm clamp width

Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation

Profile's Aris OS stem is a no-nonsense stem made from 6061-aluminum that's been shot peened and anodized for strength and durability. The 4-bolt faceplate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.

Profile's Aris stem is a no-nonsense stem made from 6061-aluminum that's been shot-peened and anodized for strength and durability. The 4-bolt face plate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.

Every Profile Design product is perfectly optimized to minimize aerodynamic drag. So, it's no surprise that Profile's Aeria Stem has hidden bolts and a low profile faceplate to smooth oncoming air. The sculpted shape is constructed from strong, lightweight forged aluminum, and the 17-degree drop ensures an aerodynamic fit on your time trial or triathlon bike.

Joining our Carbon Handlebar is the OneUp Stem. Designed for everything from trail riding to Enduro racing. The OneUp Stem can be used with a regular star nut and top cap like every other stem. It’s also compatible with existing threaded EDC top caps, for people who’ve already threaded their steerer tube. SPECS - Length: 35mm (155g) 50mm (173g) / 35mm Dia. / 0° Rise - Colour: Black. - Stack Height: 39mm - Bar Clamp Width: 55mm - Material: 6061-T6 Aluminum

The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer. Top caps are compatible with all 1-1/8" aluminum steerer tubes. The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes. KIT INCLUDES EDC TOP CAP EDC steerer plug 2x 1mm, 3mm, & 5mm Headset Spacers INSTALL THE EDC TOP CAP You need a minimum of 5mm of headset spacer above the stem and your steerer tube should be 1-2mm below the top of this spacer. Apply a small amount of grease to your newly cut thread and screw in your new EDC top cap. The Top Cap interface uses a standard cassette lockring tool. You do not need to apply much torque as you are only preloading the bearings. (Your stem pinch bolts are what holds your fork in place). The EDC multitool contains a top cap tightening tool. So even when riding you always have the ability to tighten your headset if need be. Align your stem and tighten your stem bolts to the manufacturers recommended torque. The final step is to insert the plastic bung/plug into the bottom of your fork. Turn your 8mm hex sideways and use it to push the plug into the fork by pulling the 8mm towards your chest. This piece holds the bottom of the EDC Tool and stops it from rattling. It also keeps dirt out of your fork and has a small drain hole. Note* The EDC Tap kit includes a star nut puller and self aligning tap Patents Pending All compatibility and fit determinations have been made solely by OneUp. Use of this or any other aftermarket product may void any warranty you have with the original part manufacturer.

Strong enough to endure a season in the Whistler Bike Park and light enough to pedal all day. The Overlord rules everywhere your bike can take you. We’ve updated the selection to suit modern bikes better and now offer a short 32mm length to accompany our 40mm and 50mm lengths. Specifications: - Clamp Size: 31.8mm handlebar - Fork Steerer Tube: 1 1/8? - Rise: 0-degree - Stack Height: 38mm - Hardware: 8.8 Grade Gold Zinc plated M6 bolts - Precision CNC Machined in Whistler, BC Weight: 32mm – 148g 40mm – 170g 50mm – 186g 60mm – 190g 70mm – 205g

After a delay, the king is back. We've updated the NSB Overlord stem to accommodate 35mm diameter handlebars. A wider clamp area and refined shape improve strength while retaining what we feel are the correct proportions. Still, light enough to pedal all day and strong enough to tackle full days in the Whistler Bike Park. The 35mm diameter stem is available in 35mm and 40mm lengths and will be available in all colors for the smaller Overlord. Specifications: - Clamp Size: 35mm handlebar - Fork Steerer Tube: 1 1/8? - Rise: 0-degree - Stack Height: 38mm - Hardware: 8.8 Grade Gold Zinc plated M6 bolts - Precision CNC Machined in Whistler, B.C. Weight: 35mm – 190g 40mm – 196g

Top-load design stem with a 6061 aluminum cast body and cold-forged cap for added strength. Recessed sides and front make the Control Stem simple, sleek, and lightweight. The traditional 50mm reach and generous 32mm rise make for a comfortable ride. Product Specifications - Material: 6061 Aluminum - Reach: 50mm - Rise: 32mm - Stack Height: 30mm - Bolts: M8 x P1.25 6mm - Weight: 10.4oz

MSW 17° stems raise the bar—literally—for what riders can expect from an inexpensive stem. Rigorously tested to ISO-4210 Mountain qualification standards. - Tested to ISO 4210 Mountain standards - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate for easy installation

Aero Design Stem - Handlebar Diameter: 31.8mm - Steerer Tube: 28.6mm - Stem Material: Carbon

LOOK Design Stem - Handlebar Diameter: 31.8mm - Steerer Tube: 28.6mm - Stem Material: Carbon

Balancing design, materials, and manufacturing techniques allow the Kink Bold HRD to truly be a solid and affordable stem. The die-cast aluminum body is paired with a forged 6061-T6 aluminum cap, providing additional strength. A counterbore in the stem body allows the fork cap bolt to thread down flush for a clean look. The classic 50mm reach comes with a comfortable 32mm rise and a traditional 6-bolt system. Chamfered edges and radiused corners give the stem a clean look and knee-friendly design. TECH SPECS - Reach: 50mm - Rise: 32mm - Stack Height: 30mm - Material: Aluminum Body and Forged Aluminum Cap - Bolts: Solid w/ 6mm Allen Hex - Weight: 10.7oz

The Kink Highrise stem is CNC-machined from 6061-T6 aluminum and features a lifted top-load body design. A recessed fork cap bolt area and machined body sides create a clean look and reduce unnecessary weight. The rounded stem body and chamfered edges throughout, keep the Highrise stem as knee-friendly as possible. This stem is available in two lengths to fit your riding style or preference. TECH SPECS - Reach: 48mm and 53mm - Rise: 31.5mm - Stack Height: 30mm - Material: 6061-T6 Aluminum - Bolts: Solid w/ 6mm Allen Hex - Weight: 9.6oz (48mm)

FSA's Omega line is the perfect workhorse component group for the sport rider who wants race-winning technology and durability along with classic good looks. - 3D-forged and CNC-machined from AL6061/T6 - 4-bolt cold-forged face plate - Chromoly hardware - ±6° - 31.8mm handlebar clamp diameter - 35mm fork clamp stack height - 127 grams (100mm)

- 3D forged alloy construction - Fits 1-1/8-inch (28.6mm) steerer forks - Fits 31.8mm handlebar clamp - Heat treated hardware - Weight: 152g (100mm)

- 3D forged alloy construction - Fits 1-1/8-inch (28.6mm) steerer forks - Fits 25.4mm handlebar clamp - M6 Black hardware - Weight: 161g (110mm)

- Lightweight aluminum construction - Adjusts from 0° to 60° - 25.4mm handlebar clamp - 475g